Zhejiang Sealand Technology Co., Ltd.

Zhejiang Sealand Technology Co., Ltd.

will@chinasealand.com

+86-577-56908075

Zhejiang Sealand Technology Co., Ltd.
Página inicialLista de ProdutoMedidor de fluxo de massa da indústria médicaMedidor de Flujo Masico de Liquido Glp

Medidor de Flujo Masico de Liquido Glp

Tipo de pagamento:
L/C,T/T,Western Union
Quantidade de pedido mínimo:
1 Set/Sets
transporte:
Ocean
porta:
Port Ningbo
Share:
  • Descrição do produto
Overview
Atributos do produto

Brand NameSealand

Model NumberCg-080

Mass Accuracy Grade0.2

Max. Flowrate3000kg/Min

Temperature Accuracy±1°c

Zero Stability0.115kg/Min

Nominal Diameter80mm (3*1/5)

Max. Operating Pressure4mpa

Material Of TubeStainless Steel 316l

Operating Temperature-50~200°c

Operating VoltageAc220v/50hz, Dc24/50hz

Ex-proof GradeEx[ib]iibt4gb

Place Of OriginZhejiang, China

Capacidade de fornecimento e informaçõ...

PacoteCaixa / caixa de madeira

transporteOcean

Apoio sobre300 Set/Sets per Month

portaPort Ningbo

Tipo de pagamentoL/C,T/T,Western Union

Embalagem & Entrega
Unidades de venda:
Set/Sets
Tipo de pacote:
Caixa / caixa de madeira


Introdução


Introduction of Medidor de flujo masico

Mass flow meter consist of mass flow sensor and mass flow transmitter. It does not measure the volume per unit time (eg, cubic meters per second) passing through the device, but measures the mass per u nit time (eg, kilograms per second) flowing through the device. The result of volumetric meter varies w ith temperature, pressure, composition, etc., but mass flow meter does not have such problem.

Operating principle of Medidor de flujo masico

O medidor de fluxo de massa é projetado de acordo com o efeito Coriolis. The inlet arm and the outlet arm vibrate with the same frequency as the overall vibration, but when there is mass flow the two vibrations are out of sync: the inlet arm is behind, the outlet arm is ahead. The two vibrations are shifted in phase with respect to each other, and the degree of phase-shift is a measure for the amount of mass that is flowing through the tubes.


Feartures:

*Reduced fill time with higher flow rate capacity

*Compact design with no moving parts, no special mounting and no flow conditioning required

*Fast delivery and global support


Pictures of Medidor de flujo masico

Medidor de flujo masico de liquido glp


Especificações


Specifications of mass flow sensor

Specifications of mass flow sensor

Gas accuracy

±0.5%

Liquid accuracy

±0.2%

Temp. accuracy

±1°C

Loss of pressure

≤0.2MPa

MWP

4MPa

Temp. rating

-50°C~+200°C

Connector

DN80 flange, customizable

Ex-proof grade

Ex[ib]IIBT1~T6 Gb / Ex[ib]IICT1~T6 Gb


Specifications of mass flow transmitter

Specifications of mass flow transmitter

Temp. rating

-20°C~+50°C

RH

95%, not condensed

 Atmospheric Pressure

86~106 kPa

Operating voltage

AC220V/50Hz, DC24/50Hz

Communication port

RS485 Modbus RTU

Ex-proof grade

Exd[ib]IIBT4Gb


Specifications of Medidor de flujo masico


Specifications of mass flow meter

Model No.

CNG-080

Mass accuracy grade

0.2

Temperature accuracy

±1°C

Zero stability

0.115kg/min

Repeatability

0.25%

Max. flowrate

3000kg/min

Nominal diameter

80mm( 3*1/5 inch)

Fluid temperature

-200~200°C

Material of tube

Stainless steel 316L

Packing

1set/carton or wooden case

Warranty

2 years

Package size

1340*1300*1000mm

G.W.

127.8kgs


Dimension of mass flow meter

Medidor de flujo masico de liquido glp


Advantages of Medidor de flujo masico


1. High reliability


2. It requires low maintenance, because of no movable parts.


3. High accuracy: Generally, it is from 0.15%-0.3%.


4. It is not affected by the fluid, saving the design & installation cost.


5. It shows many parameter simultaneously, such as mass flow, temperature, density, etc.


6. Convenient installation: Generally, there is no specific requirement of choosing upstream or downstream pipe.


7. Wide application: Besides the common fluid, the mass flowmeter can measure other industrial media, such

as non-Newtonian fluid, all kinds of slurry, suspensions, etc.



Installation of Medidor de flujo masico

It is highly recommended to install as follows, for different fluid.

Medidor de flujo masico de liquido glp


Processo de produção


Production process of Medidor de flujo masico

1. Bend vibrating tubes with bending machine

Medidor de flujo masico de liquido glp

2. Smear the solder on the production line
Medidor de flujo masico de liquido glp
3. Solder the tubes in the Vacuum brazing furnace
Medidor de flujo masico de liquido glp
4. Wire the mass flowmeter (at the same production line of step 2)
5. Test for the 1 st time
Medidor de flujo masico de liquido glp
6. Burn-in: Mass flowmeter will be excercised for 15 days prior to being placed in service.
Medidor de flujo masico de liquido glp
7. Test for the 2 nd time (at the same production line of step 5)

8. Cover the tubes with housing & polish the surface (at the same production line of step 2)

9. Test for the 3 rd time(final test; this test equipment is approved by China government, and is the
TEST STANDARD of mass flowmeter in China)
Medidor de flujo masico de liquido glp

Bulk order of Medidor de flujo masico

Medidor de flujo masico de liquido glp


Grupo de Produto : Medidor de fluxo de massa da indústria médica

Enviar e-mail para este fornecedor
  • *Assunto:
  • *Para:
    Mr. Will
  • *E-mail:
  • *mensagem:
    Sua mensagem deve estar entre 20-8000 caracteres
Página inicialLista de ProdutoMedidor de fluxo de massa da indústria médicaMedidor de Flujo Masico de Liquido Glp
Enviar Inquérito
*
*

Casa

Product

Phone

Sobre nós

Inquérito

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

enviar